BAN: Building Your Bluebird Box  

Home
Calendar
Bluebird Basics
Newsletters
County Coordinators
BAN Information
Educational Material
Articles & Information
Wood Duck Project
Conference
Gift Ideas
BAN Photo Album
Links
By Laws

Building this basic bluebird box can be accomplished without many tools or skills and for very little expense. Box building can be a fun family project. It is also a good project for 4-H groups, Girl Scouts, Boy Scouts, senior citizens, etc. Below are a few tips and ideas.

LUMBER
bulletNever use treated lumber. The chemical in the wood can be toxic to both you and the bluebirds.
bulletCedar and Redwood are ideal. They are long-lasting and require no paint or wood preservative.
bulletPine, Douglas Fir, Cypress, and exterior plywood also work well. Painting is recommended and will add years of life to the box. When painting the box:
bulletDo not use a dark color as it may cause the box to overheat.
bulletLight, it shades of gray, green or tan will fit in with natural surroundings and will make your box less conspicuous.
bulletTwo coats of paint are recommended for die roof as it the part of die box that is most exposed to the elements.
bulletWood preservatives may be used on the exterior of the box only.
bulletDo not paint the inside of the box.

ECONOMY BOXES - KNOW WHERE TO FIND YOUR LUMBER

This box can be built without actually buying any lumber. There is free lumber available if you know where to look.
bulletLumberyards - Most lumberyards have piles of scrap lumber, i.e.. warped, too short to sell. Let them know what you' re using the lumber for - discounts may be given. The lumberyard may receive a tax credit if a donation is made.
bulletConstruction sites - Scrap lumber is often thrown in a pile or dumpster. With permission, most builders will be glad to give you the lumber.
bulletPacking crates are usually made from I x or 2x material. Disassembly will be required.

TOOLS NEEDED: Circular or table saw; hammer; drill; 1 « or 19/16" hole cutter.

MISCELLANEOUS:
bulletThe nails holding die roof on will work loose in time. Use a specialty nail such as a ring shank, spiraled nail, or wood screw.
bulletGalvanized nails are recommended.
bulletBe safety conscious when building your boxes.
bulletThe hole for the double-head nail on the door should be oversized. Humidity and rain will cause the hole to swell shut and you will not be able to remove the nail.
bulletUse a wood screw rather than a double-headed nail to hold the door closed in areas where you might expect human interference.
bulletRoughen the inside and outside of the door below die entrance hole if plain lumber is used. This makes it easier for the nestlings to leave the box and helps the parents grip the exterior when feeding the young.

MOUNTING POLES

A box may be placed on a wooden fence post or fence line if there are no raccoons or cats in your area. A smooth, round pipe cut to approximately 8 foot works well and help keep predators off your box.
bulletScrap pipe may be found at construction sites and salvage yards.
bulletWell-diggers frequently discard 21' pieces of pipe.
bulletScrap piles at overhead garage door companies will contain either 8'or 16' lengths of pipe.
bulletA 10' piece of 3/4" electrical EMT conduit is inexpensive and can be cut down to approximately 8'.
bulletFlattening the end of the round pipe with a heavy hammer will keep it from turning in the ground.
bulletMetal t-posts are often used, but can be easily climbed by raccoons or cats.
bulletMany bird stores now carry mounting systems for bird boxes.
bulletUsing a fence post driver rather than a heavy hammer to drive the pole into the ground may save a skinned knuckle

Up Next

Home | Calendar | Bluebird Basics | Newsletters | County Coordinators | BAN Information | Educational Material | Articles & Information | Wood Duck Project | Conference | Gift Ideas | BAN Photo Album | Links | By Laws